360 Degree 16t Automatic Crane Rotational Spreader for Paper Mill

Product Description

360 degree 16T Automatic rotating spreader for paper mill

Product Description

General description:

Spreader is an intermediate lifting accessory positioned between a hoist and a load. They act as a crosspiece for spacing the hooks or chains that hold loads such as bundles, rolls, cylinders and machinery.It enables the load to be hooked up, guaranteeing optimum stability and reduced headroom.

A lifting beam has a simple design consisting of a beam with a single attachment point centered on the top side of the beam for connecting to a crane, hoist, or other lifting machine. Some lifting beams may have two bails in order to engage two crane or hoist hooks. There are typically two or more evenly-spaced lifting lugs on the underside of the beam that attach to and support the load via hook or sling.It allows lifting objects whose weight is not equilibrated or objects that have a singular design that doesn't allow to be lifted with a standard lifter.

There are different spreader designs such as automatic container spreader,mud tank lifting spreader,Automatic Train Cover Spreader,Automatic Paper Coil Spreader,Automatic Vacuum Spreader,C Hook Spreader,etc.and each one has different uses and advantages.

Nante rotating spreader beam is a kind of special equipment designed by our company with reference to similar foreign products and domestic engineering construction characteristics. The spreader has the advantages of advanced structure, reasonable mechanical properties, light weight, large stiffness, simple operation, easy to use, safe and reliable, easy to disassemble and so on. The spreader can be used in the production workshop and is suitable for lifting and transporting heavy objects. The spreader has been used for many years and can produce good economic benefit.

Advantages:

1. Rotate with safety :The load hangs at a ball-bearing supported slewing ring.
2. The power consumption of electric spreaders is about 6% of that of traditional hydraulic spreaders, which greatly saves energy.
3. High flexibility of the crane due to coupling beam.
4. Smooth acceleration/deceleration by frequency converters.
5. The electric spreader is in the way that the motor drives the mechanical rotation. The whole spreader has no hydraulic system, so there is no need for oil tank, solenoid valve and oil pipe.
6. Compared from maintenance ,the cost of the electric spreader is lower than that of the hydraulic spreader.
7. Compared with the hydraulic spreader, the electric spreader has a simple structure, fewer failure points, a lower failure rate, which makes  it more stable in use.
8. The electric spreader adopts mechanical transmission, which has no obvious influence by the change of ambient temperature, and the temperature difference range is large.

 

---------------------------------------------Design and Manufacturing Features---------------------------------------------

Design Code:
 NANTE's spreader follows the design code of FEM, CMAA, ISO EN, BS, GB standard.
Beam:
Upper beam and lower beam are welded by Q355B material, with good strength and rigidity.
Hook Plate:
The hook plate is made of Q355B material and cut by numerical control cutting, with good strength.
Slewing Bearing:
The slewing bearing adopts the brand product, the appearance is beautiful, the bearing capacity is big, has the fine comprehensive performance.
Pin shaft:
The pin shaft is made of S45C and has been quenched and tempered.
Gear Motor:
Worldwide top brand gear motor to make sure the quality, IP55, F insulation class, overheat protection, manual release bar, and equipped with electro-magnetic brake.
Control Panel:
Follow IEC standard, IP55 powder coating high quality enclosure,DIN standard terminal, international brand for the inverter, MCB, Contact and electrical devices on the panel
Anti-corrosive Treatment:
Shoot Blasting follow ISO8501-1 SA2.5 class, roughness follow ISO 8503 G class, clearness follow 8502-3 Level II. Use top brand like Hempel, International, and Jordon's Rich zinc epoxy painting for the prime, middle layer coating. Use polyurethane topcoat for the finished layer coating. All NANTE painters are trained or inspected by NACE or FROSIO level II Inspector.

 

Product Parameters

Application:

Nante manufactures spreader for all kind of different applications and services sectors like:renewable energy sources,wind turbines,eolic rotors,windmill blades,steel mills,paper mills,aeronautics and aviation sectors,aerospatial industry,solar energy industry,metal service centers, stamping plants, power plants and in difficult environments with varied crane layouts.

 

Company Profile

FAQ

Q1: Are you Manufacturer or Trading Company,

A1:We are an integrated industrial and trade enterprises. We have our own R&D team, factory and marketing department,

Q2: Which standard of your crane and crane components apply to?
A2: Our Crane can design and manufacture base on FEM, CMAA, ISO EN, GB standard.

Q3: How do you ensure your product quality?
A3: All our processes strictly adhere to ISO-9001 procedures, which include Material Traceability, ISO WPQR and welder certificate, Measuring Device Calibration, NDT for the welding, and full assembling and load testing before delivery.

Q4: How can I make payment?
A: We accept T/T bank transfer, L/C, Paypal.

Q5: How can I assembly the cranes in my factory?
A: We suggest you to recruit a crane service team in local to install the crane base on our Installation Guideline and User manual. If cannot, we can send engineer to your factory to guide you do the installation with extra charge, and the transportation, accommodation, translator shall be covered by your side also.

Q6: What is the warranty period, and how can I claim warranty If my crane have any issue?
A: Our warranty period is 12 months after cargo leave China port. If the crane have any issue, our after-sales team and engineer will help you solve the issue by email or Video conference. If the defect is caused by quality issue, we will ship the spare parts to you by air to help you fixed it as soon as possible.

Q7: Do you accept OEM business:
A: Sure, we do many OEM productions for some famous crane brand and customers around the world.

Q8: What about shipping:
A: We recommend small batch by the way of air or LCL, but large delivery by the way of container or bulk vessel.

Q9: what about delivery time?
A: different capacity crane and components have different estimated delivery time, generally speaking, around 4 weeks to 8 weeks.

Q10: What is your company policy if we want to distribute NANTE product in our market?
A: Firstly, thank you for your interest to promote NANTE brand, we have distributors in 50+ countries, pleaes no hesitate to contact us for the detail discussions, as we have different policies for the different target markets. Surely, you are welcomed to visit our factory and let's talk face to face.