Overhead Crane Limit Switch for Long Travel and Hoist Travel

• Customization: Available
• Structure: Working Limit Switch
• Type: Angle Limit Switch
• Model NO.: SNB
• Switching Element: Speed Switch
• Application: Overhead Crane
• Contactless Type: Inductive Switch
• Contact: Contact
• Rotation: 180 or 360 Degree
• IP Class: IP66
• Alu Rod Length: 200mm or 300mm
• Transport Package: Carton Packing
• Specification: 200mm, 300mm
• Trademark: Nante
• Origin: China
• HS Code: 8536500000
• Production Capacity: 500000 Pieces Per Year

Product Description

Overhead Crane Limit Switch for Long Travel and Hoist Travel

Product Description

General description:

The crane limit switch is a safety device which including traveling limit switch and load limit switch. Traveling limit switch used both on crane and hoist or trolley. Load limit switch used on hoist and trolley.Traveling limit switch control the travel of the working machine, while the limit switch control the position of the working machine, and often the terminal position or limit position.

Cross limit switch can stop the crane when driving to the extreme position or near the limit position in order to avoid collision damage to the crane or other equipment.It is usually installed on the inside of the active platform, mainly to install a stroke switch that can be pushed. Another at the end of the track (running limit position) to install a fixed limit position of the baffle. When the crane operation to the position, limit baffle will touch the limit switch, cut off the control of the power of walking, then crane can only traveling to the opposite direction when closing.

Nante suns limit switch is used to two speed, slowing down and stopping two-way limit.There are two type of the limit switch :180°200mm or 300mm and 360°200mm or 300mm.It has the following characteristics:

1. Limit the cart and the car walks, make big, the car near the rail end automatically slow down and stop.
2. Apply to some forbidden area need to crane on car steering.
3. Slow increase brake life and safety operation.
4. High-quality drive and control technology.
5. Switchover (fast/slow) and limiting in both directions of travel.
6. The shell is made of aluminum alloy.
7. Have automatic reset function.
8. The all-round rubber seal provides optimum protection against dust and water, so that protection degree IP66 can be achieved without any problems.

 

Product Parameters

 
 

Technical Data of cross limited switch
Conforming Standard to Products	IEC 947-5-1, EN 60 947-5-1, VDE 0660-200
Conforming Standard to Assemblies	IEC 204-1, EN 60 204-1, NF C 79-130
Resistance to Vibration	25 gn(10 - 500Hz) conforming to IEC 68-2-6
Resistance to Shock	50 gn conforming to IEC 68-2-27
Electric Shock Protection	Class I conforming to IEC 536 and NF C 20-030
Ambient air temperature	Operation : - 25 - 70ºC―Storage: - 40- 70ºC
IP Class	IP66
Mechanical Durability	2 million Op. cycles
Torque for Tripping	0.5 Nm
Torque for Positive Opening	0.75 Nm
Maximum Actuation Speed	1.5m/s
Rated Operational Characteristics	AC-15 , A300 or Ue = 240 V, Ie = 3 A
	DC-13 , Q300 or Ue = 125 V, Ie = 0.55 A
	conforming to IEC 947-5-1 Appendix A
Rated Insulation Voltage	Ui = 600 V degree of pollution 3 conforming to IEC 97-1,EN60947-5-1
Rated Impulse Withstand Voltage	U imp = 6 kV conforming to IEC 947-1, IEC 664
Positive Operation	N/C contacts with positive opening operation conforming to IEC 947-5-1 , EN 60 947-5-1
Short-circuit Protection	10A cartridge fuse type gG(gl)
Conduits	1/2NPT, M20×1.5, PG13.5
Cabling	Screw and captive cable clamp terminals. Clamping capacity, min.: 1 x 0.34mm2, max.: 2 x 1.5mm2 or 1 x 2.5mm2 depending on contact, Screw tightening torque max.:1.2Nm
Weight	0.55kg

Application:

Nante suns limit switch is widely used in the crane industry to end-stops for long travel and cross-travel on 2-speed cranes. Simple to install and wire, Nante suns limit switch is a very economical solution. The installer can replace 4 traditional limit switches, and dramatically reducing fitting time and cost.Installation in simple, with a single switch, and up to four strikers.

 

Company Profile

FAQ

Q1: Are you Manufacturer or Trading Company?
A1:We are an integrated industrial and trade enterprises. We have our own R&D team, factory and marketing department.

Q2: Which standard of your crane and crane components apply to?
A2: Our Crane can design and manufacture base on FEM, CMAA, ISO EN, GB standard.

Q3: How do you ensure your product quality?
A3: All our processes strictly adhere to ISO-9001 procedures, which include Material Traceability, ISO WPQR and welder certificate, Measuring Device Calibration, NDT for the welding, and full assembling and load testing before delivery.

Q4: How can I make payment?
A4: We accept T/T bank transfer, L/C, Paypal.

Q5: How can I assembly the cranes in my factory?
A5: We suggest you to recruit a crane service team in local to install the crane base on our Installation Guideline and User manual. If cannot, we can send engineer to your factory to guide you do the installation with extra charge, and the transportation, accommodation, translator shall be covered by your side also.

Q6: What is the warranty period, and how can I claim warranty If my crane have any issue?
A6: Our warranty period is 12 months after cargo leave China port. If the crane have any issue, our after-sales team and engineer will help you solve the issue by email or Video conference. If the defect is caused by quality issue, we will ship the spare parts to you by air to help you fixed it as soon as possible.

Q7: Do you accept OEM business?
A7: Sure, we do many OEM productions for some famous crane brand and customers around the world.

Q8: What about shipping?
A8: We recommend small batch by the way of air or LCL, but large delivery by the way of container or bulk vessel.

Q9: What about delivery time?
A9: Different capacity crane and components have different estimated delivery time, generally speaking, around 4 weeks to 8 weeks.

Q10: What is your company policy if we want to distribute NANTE product in our market?
A10: Firstly, thank you for your interest to promote NANTE brand, we have distributors in 50+ countries, pleaes no hesitate to contact us for the detail discussions, as we have different policies for the different target markets. Surely, you are welcomed to visit our factory and let's talk face to face.