| Customization: | Available |
|---|---|
| Type: | Diffuse Reflection Type Photoelectric Sensor |
| Output Signal Type: | Switching Type |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Photoelectric Distance Selection Anti Collision Sensor for Crane
Photoelectric distance selection anti collision sensor is one of the most popular products in our company and between our customers. It can be used for many application, such as gantry crane, overhead crane, semi-gantry crane and so on. For cranes with multiple sets or multiple layers on the same floor, collision is easy to occur. When the operation is complex and the operation speed is fast, it is difficult to avoid accidents only by the worker's judgment. In order to prevent the crane from colliding with adjacent cranes when running on the track, anti-collision devices shall be set on the crane when the running speed exceeds 120 m / min.
| Technical Data of Photoelectric Distance Selection Anti Collision Sensor for Crane | |||
|
Type |
Free power, Relay contact output |
||
|
Through-beam |
Retroreflective |
||
|
Model |
BEN10M-TFR |
BEN5M-MFR |
|
|
Sensing distance |
10m |
0.1 to 5m |
|
|
Sensing target |
Opaque materials of min.ø16mm |
Opaque materials of min.ø60mm |
|
|
Respinse time |
Max.20ms |
||
|
Power supply |
24-240VAC~±10% 50/60Hz, 24-240VDC≡±10% (ripple P-P:max.10%) |
||
|
Power consunmption |
Max. 4VA |
||
|
Light source |
Infrared LED (850nm) |
||
|
Sensitivity adjustment |
- |
Sensitivity adjuster |
|
|
Operation mode |
Selectable Light ON or Dark ON by switch |
||
|
Relay lifetime |
Mechanically:Min.50,000,000 operation, Electrically: Min.100,000 operation |
||
|
Control output |
Relay contact output |
||
|
Relay contact capacity: 30VDC 3A of resistive load, 250VAC~3A of resistive load |
|||
|
Relat contact composition:1c |
|||
|
Relay lifetime |
Mechanically:Min.50,000,000 operation, Electrically: Min.100,000 operation |
||
|
Light receiving element |
Photo IC |
||
|
Indication |
Operation indicator: red, stable indicator: green |
||
|
Insulation resistance |
Over 20MΩ (at 500VDC megger) |
||
|
Noise immunity |
±1000V the square wave noise(pulse width:1μs)by the noise simulator |
||
|
Dielectric strength |
1000VAC 50/60Hz for 1 minute |
||
|
Environment |
Ambient illuminaton |
Sunlight: max.11,000lx, incandescent lamp: max.3,000lx(receiver illumination) |
|
|
Ambient temperature |
-20 to 65ºC, storage: -25 to 70ºC |
||
|
Ambient humidity |
35 to 85%RH, storage: 35 to 85%RH |
||
|
Protection structure |
IP50(IEC standard) |
||
|
Material |
Case, case cover: heat resistant ABS Sensing part: PC(with polarizing filter PMMA) |
||
|
Cable |
ø5.0mm, 5-wire, length: 2m(emitter of through-beam type: ø5.0mm, 2-wire, length: 2m) |
||
|
(AWG22, core diameter: 0.08mm, number of cores: 60, insulator diameter: ø1.25mm) |
|||
|
Accessory |
Individual |
- |
Reflector(MS-2) |
|
Common |
Adjustment screwdriver, mounting bracket, M4 bolt: 4, M4 nut: 4 |
Adjustment screwdriver, mounting bracket, M4 bolt: 2, M4 nut: 2 |
|
|
Unit weight |
Approx.354g |
Approx.208g |
|
1. Small and light
2. Easy installation
3. Low price and long service life
Q1: Are you Manufacturer or Trading Company?
A1:We are an integrated industrial and trade enterprises. We have our own R&D team, factory and marketing department,
Q2: Which standard of your crane and crane components apply to?
A2: Our Crane can design and manufacture base on FEM, CMAA, ISO EN, GB standard.
Q3: How do you ensure your product quality?
A3: All our processes strictly adhere to ISO-9001 procedures, which include Material Traceability, ISO WPQR and welder certificate, Measuring Device Calibration, NDT for the welding, and full assembling and load testing before delivery.
Q4: How can I make payment?
A4: We accept T/T bank transfer, L/C, Paypal.
Q5: How can I assembly the cranes in my factory?
A5: We suggest you to recruit a crane service team in local to install the crane base on our Installation Guideline and User manual. If cannot, we can send engineer to your factory to guide you do the installation with extra charge, and the transportation, accommodation, translator shall be covered by your side also.
Q6: What is the warranty period, and how can I claim warranty If my crane have any issue?
A6: Our warranty period is 12 months after cargo leave China port. If the crane have any issue, our after-sales team and engineer will help you solve the issue by email or Video conference. If the defect is caused by quality issue, we will ship the spare parts to you by air to help you fixed it as soon as possible.
Q7: Do you accept OEM business?
A7: Sure, we do many OEM productions for some famous crane brand and customers around the world.
Q8: What about shipping?
A8: We recommend small batch by the way of air or LCL, but large delivery by the way of container or bulk vessel.
Q9: what about delivery time?
A9: different capacity crane and components have different estimated delivery time, generally speaking, around 4 weeks to 8 weeks.
Q10: What is your company policy if we want to distribute NANTE product in our market?
A10: Firstly, thank you for your interest to promote NANTE brand, we have distributors in 50+ countries, pleaes no hesitate to contact us for the detail discussions, as we have different policies for the different target markets. Surely, you are welcomed to visit our factory and let's talk face to face.
){kind=link}