C63 Galvanized Steel Rail Cable Trolleys Festoon System For Hoist Power Supply
General description:
The Festoon System is a mobile electrification system, which is a safe, effective and economical way of supplying power to cranes, hoists and moving machinery traveling along fixed tracks. It by using flat or round cable through cable trolley traveling on a C track (C30, C32, C40, C63), I beam, wire rope, angle bar or square/diamond track.
Festoon systems have been available for industrial applications for many decades now. In many cases, the festoon cable system over its extensive life provides a lower cost of ownership than conductor bar, open copper wire, cable reels, and power cords to name a few. Festoon systems can be a great option, particularly for short travel distances and if lots of control cabling is required.
Stainless steel C track is one of the special festoon systems which is a good option for heavy corrosion environment.
Advantages:
- Safety - the cable are flame resistant, the conductor are completely protected;
- Versatility - it can be used for straight rail as curves rail, for indoor and outdoor applications;
- Easy to install;
- The maintenance of the line is extremely reduced.
Components:
- C-track: The trolley moving in the C rail, Include straight track and curved section with R more than 1m. The length for the straight section is 4m; it is extended with the Joint. Versatility - it can be used for straight rail as curves rail, for indoor and outdoor applications;
- Towing Trolley: It drives the middle trolley move along the track. Four fully enclosed ball bearings, flexible, applied to the dense dust occasion. The maintenance of the line is extremely reduced.
- Middle Trolley: Wheel is fully enclosed ball bearing; Cable clamp is curved soft rubber cushion; Bumper is installed in case of impact.
- End Trolley: End device, which prevent the trolley slide out of the track.
- Joint: Clamp type is common used and cost-effective, square type is new one which same as Taiwan brand.
- Hanger: C63HG hanger for angle steel support bracket.
- End stop: End device, common use for C32 and C40.
- End cap: Plastic material, dust cover, nice-looking.
- Support Bracket: C40 support attachment, welding support bracket, easy for installing.
- Cable:Power cable and pendent control cable. PVC housing or rubber housing for option.
- Steel Wire: Safe and reliable.
Design features:
Compact arrangement, corrosion resistance and simple assembly are its essential features, easy for transportation and installation.
- Material: Galvanized Steel, 304# Stainless Steel, Aluminum, PVC (Nylon coating is optional for heavy corrosion environment
- Ambient temperature: -35ºC-90ºC
- Trolley movement speed: V<120m/min
- Trolley service life: 32000
- Curve R ≥ 1.0m, only C32 can be curve
| C Track Festoon System |
| Type |
C32*30*1.5 |
C40*40*2.0 |
C63*63*4.0 |
C30*28*1.5 |
| Material |
Galvanized steel /Stainless Steel 304/316 |
| Weight kg/m |
1.19 |
2 |
5.98 |
1.03 |
| Technical data |
| A |
32 |
40 |
63 |
30 |
| B |
30 |
40 |
63 |
28 |
| C |
12 |
13 |
18 |
10 |
| 6 |
1.5 |
2 |
4 |
1.5 |
| Spacing |
Max. Cable Load |
| 1.5m |
89kg |
188kg |
503kg |
70kg |
| 2.0m |
51kg |
103kg |
425kg |
36 kg |
| 2.5m |
39kg |
73kg |
302kg |
22kg |
| 3.0m |
23kg |
49kg |
195kg |
- |
| 4.0m |
- |
28kg |
85kg |
- |
Application:
C-rail systems applications: crane manufacturing, hoist units, monorails, transport systems, special engineering, stacking systems, conveyor system, water treatment systems, bulk material conveyors, plating lines etc. C-rails are available in zinc-coated and stainless steel version (program 230 to 240). Special versions are available for explosion-proof areas.
Q1: Are you Manufacturer or Trading Company?
A1:We are an integrated industrial and trade enterprises. We have our own R&D team, factory and marketing department,
Q2: Which standard of your crane and crane components apply to?
A2: Our Crane can design and manufacture base on FEM, CMAA, ISO EN, GB standard.
Q3: How do you ensure your product quality?
A3: All our processes strictly adhere to ISO-9001 procedures, which include Material Traceability, ISO WPQR and welder certificate, Measuring Device Calibration, NDT for the welding, and full assembling and load testing before delivery.
Q4: How can I make payment?
A4: We accept T/T bank transfer, L/C, Paypal.
Q5: How can I assembly the cranes in my factory?
A5: We suggest you to recruit a crane service team in local to install the crane base on our Installation Guideline and User manual. If cannot, we can send engineer to your factory to guide you do the installation with extra charge, and the transportation, accommodation, translator shall be covered by your side also.
Q6: What is the warranty period, and how can I claim warranty If my crane have any issue?
A6: Our warranty period is 12 months after cargo leave China port. If the crane have any issue, our after-sales team and engineer will help you solve the issue by email or Video conference. If the defect is caused by quality issue, we will ship the spare parts to you by air to help you fixed it as soon as possible.
Q7: Do you accept OEM business?
A7: Sure, we do many OEM productions for some famous crane brand and customers around the world.
Q8: What about shipping?
A8: We recommend small batch by the way of air or LCL, but large delivery by the way of container or bulk vessel.
Q9: What about delivery time?
A9: Different capacity crane and components have different estimated delivery time, generally speaking, around 4 weeks to 8 weeks.
Q10: What is your company policy if we want to distribute NANTE product in our market?
A10: Firstly, thank you for your interest to promote NANTE brand, we have distributors in 50+ countries, pleaes no hesitate to contact us for the detail discussions, as we have different policies for the different target markets. Surely, you are welcomed to visit our factory and let's talk face to face.
){kind=link}